User Manual Q&AAnswer
Sep 09, 2024 - 11:44 PM
To set up and position the Logitech Harmony IR Extender System, follow these steps:
1. Place the IR receiver outside of your cabinet, ensuring that you have a clear line of sight to it from wherever you normally operate your home entertainment system.
2. Connect the blaster to a power outlet using the AC adaptor provided and place it on a shelf inside your cabinet. Then, connect the IR receiver to the blaster. The status light should blink whenever the IR receiver detects a signal from your remote.
Note: The status light may also blink when the IR receiver detects other light sources, such as plasma TVs or direct sunlight. For best performance, position the IR receiver away from these sources of light.
3. Proper positioning of the blaster and mini blasters is essential for optimal control of the devices in your home entertainment system. Here are some examples of how to position them:
- If you only have a blaster, place it in a position where it can control all the devices in your cabinet.
- If you have both a blaster and mini blasters, position the blaster to control the devices that are directly in front of it, and position the mini blasters to control devices that are not directly in front of the blaster. This will ensure that all devices receive the IR signals properly.
- Make sure the blaster or mini blasters are not positioned in the vicinity of the IR receiver, as this can cause sporadic control. Keep them separate from the IR receiver.
By following these steps and positioning the IR receiver, blaster, and mini blasters correctly, you should be able to achieve optimal control of your devices using the Logitech Harmony IR Extender System. For more information and visual examples, you can refer to the Logitech Harmony IR Extender System User Manual.
Add New Comment