User Manual Q&AAnswer
Sep 04, 2024 - 01:06 AM
To connect and power the Logitech VR0031 Litra Beam Light, follow these steps:
1. Ensure that you have a Listed/Certified power supply rated at 5 Vdc, with a minimum current of 1.4 A. The maximum ambient temperature (Tma) should not exceed 35 degrees Celsius. If you need further information about the power supply, please contact the manufacturer.
2. Connect the power supply or power cord to a properly wired and grounded electrical outlet.
3. Do not open or modify the product. The Litra Beam Light should be used as is, without any disassembly or attempts at servicing.
4. The product is designed to be used with listed/certified ITE computers and accessories. Ensure compatibility with your device before use.
5. The Litra Beam Light is not suitable for children under 36 months due to small parts that may pose a choking hazard. It is also not intended for use by children under 14 years old.
6. The product is safe for normal and reasonably foreseeable operating conditions. If you encounter any issues with the product's operation, please contact Logitech support for assistance.
7. If the external flexible cable or cord of the product is damaged, replace it with a cable or cord provided by the manufacturer.
8. The Litra Beam Light is designed for indoor use only, with an ambient temperature not exceeding 35 degrees Celsius.
9. The product is not suitable for mounting on tubular material.
10. The light source of the product is not replaceable. When the light source reaches its end of life, the entire product should be replaced.
11. Install the product according to the provided instructions. Improper installation may cause damage or injury.
Please refer to the Logitech VR0031 Litra Beam Light User Guide for more detailed information and safety guidelines.
Add New Comment