How do I install the Logitech SCRIBE camera? (Logitech SCRIBE User Guide)

Answer

manuals.plus

Sep 04, 2024 - 12:58 AM

To install the Logitech SCRIBE camera, follow these steps:

1. Attach the camera mounting bracket: Use the provided mounting template to mark the  xxxx  hole locations. Then, attach the camera mounting bracket to the wall using the included screws.

2. Plug in the CAT5e cable and choose a routing option: Connect one end of the CAT5e cable to the camera and the other end to the power injector. Choose the appropriate routing option for the cable based on your setup.

3. Attach the camera onto the camera mounting bracket: Securely attach the camera onto the camera mounting bracket.

4. Connect the CAT5e cable to the power injector: Insert the cable connected to the camera into the "OUT" port of the power injector.

5. Connect the power injector to a power outlet: Plug the power injector into a power outlet using the provided IEC C8 power cord adapter.

6. Connect a second CAT5e cable to the power injector: Insert the other end of the CAT5e cable into the "IN" port of the power injector.

7. Connect the other end of the second CAT5e cable to the dongle transceiver: Plug the dongle transceiver into the meeting room PC.

8. Install the share button: Choose a suitable height (30"-48" from the floor) and mount the share button to the wall. Remove the battery pull tabs only after mounting.

9. Start whiteboard sharing from the meeting room touch controller.

10. Confirm calibration to finish setup: If the calibration is correct, press the share button to confirm. If the calibration is incorrect, download Logitech Sync to adjust boundaries.

11. You're ready to go! Press the share button to easily start/stop whiteboard sharing in meetings.

For more detailed information and troubleshooting, refer to the Logitech SCRIBE User Guide provided with the product or visit the Logitech support website at www.logitech.com/support.