Answer
Aug 31, 2024 - 02:53 AM
To register the VTech CS6409 Accessory Cordless Handset with the telephone base, please follow these steps:
1. Place the unregistered handset in the telephone base or charger. If the screen on the handset does not display "1. PRESS FIND HS ON BASE 4 SEC" and "2. THEN PRESS # ON HANDSET" alternately after a few seconds, remove the handset and place it in the telephone base or charger again.
2. On the telephone base, press and hold the /FIND HANDSET button for about four seconds until the red IN USE light on the telephone base turns on.
3. On the handset, press the # (pound key) button. The handset will display "REGISTERING..... PLEASE WAIT". Wait for about 60 seconds until the handset displays "HANDSET REGISTERED" and you hear a beep. This indicates that the registration process is complete.
Note: If the registration fails, the handset will display "REGISTRATION FAILED" and then "1. PRESS FIND HS ON BASE 4 SEC" and "2. THEN PRESS # ON HANDSET" alternately. To reset the handset, remove it from the telephone base and place it back in. Then, try the registration process again.
Please refer to the user's manual for more detailed instructions on using the VTech CS6409 Accessory Cordless Handset.
Add New Comment