User Manual Q&AAnswer
Aug 31, 2024 - 02:39 AM
To program the photo memory buttons on the SMPL 2 ‘n 1 Emergency Alert Photo Memory Landline Phone, follow these steps:
1. Pick up the handset.
2. Press and hold the desired photo button for about 3 seconds until you hear a beep.
3. Enter the number using the keypad as you would normally dial. Ignore any sounds you may hear from the handset during programming.
4. Press and release the same photo button again. Do not long-press or wait for a beep this time.
5. Hang up the receiver. The number is now saved to the photo memory button.
Note: The stored numbers will be retained even if the phone is unplugged.
For more detailed instructions and illustrations, please refer to the user guide provided with the SMPL 2 ‘n 1 Emergency Alert Photo Memory Landline Phone.
Add New Comment