User Manual Q&AAnswer
Aug 29, 2024 - 05:58 AM
To recharge the battery of your Eken P8 Video Doorbell, please follow these steps:
1. Remove the mounting bracket from your doorbell by placing your thumbs on the sides of the doorbell and pulling away from the mounting bracket.
2. Locate the battery tab and remove it.
3. Use the provided micro-USB cable to connect your doorbell to a power source for charging. Make sure to use a power source with at least 5V1A.
4. A solid RED light will indicate that the doorbell is charging.
5. It takes approximately 10 hours to fully charge the doorbell, depending on the power source.
6. Once the doorbell is fully charged, the RED light will turn off.
Please note that these instructions are based on the information provided in the Eken P8 Video Doorbell User Manual. For more detailed instructions and illustrations, you can refer to the user manual or download it from the provided PDF link.
Add New Comment