User Manual Q&AAnswer
Aug 28, 2024 - 01:18 AM
Wiring the source is a straightforward process. Here's a step-by-step guide:
1. Identify the positive and negative terminals on both the speakers and the amplifier source. The positive terminal is usually marked with a "+" symbol, while the negative terminal is marked with a "-" symbol.
2. Take the red cable (positive) from the speaker pair and connect it to the positive terminal of the amplifier source.
3. Take the black cable (negative) from the speaker pair and connect it to the negative terminal of the amplifier source.
4. Repeat the above steps for the second speaker pair, if applicable.
5. For models with built-in LED lights, such as PLMRS43WL, PLMRS43BL, PLMRS53WL, PLMRS53BL, PLMRS63WL, and PLMRS63BL, follow the same wiring procedure as mentioned above.
6. Additionally, connect speakers 'A' and 'B' to the amplifier source. Speaker 'A' should be wired to the positive and negative terminals of the amplifier source, while speaker 'B' should be wired in parallel to speaker 'A' using the same positive and negative terminals.
7. Ensure that all connections are secure and tightly fastened.
By following these steps, you should be able to properly wire the Pyle PLMRS marine speakers to your amplifier source. For further assistance or clarification, you can refer to the product manual or contact Pyle's customer support.
Add New Comment