User Manual Q&AAnswer
Aug 28, 2024 - 01:14 AM
To pair the transmitters with the receivers of the Coolqiya Q2 Wireless Doorbell, follow these steps:
1. Before installing the transmitters on the door frame, it's important to pair them with the receivers. This ensures proper functionality.
2. Start by picking the sound you want for the doorbell by pressing the Music Control Button on the receiver. Cycle through the available sounds until you find the one you prefer.
3. Press and hold the volume button on the receiver for 5 seconds until it blinks with a "ding" sound. This puts the receiver in pairing mode.
4. Quickly push the transmitter button at the same time (within 5-7 seconds) to pair it with the receiver. Make sure the transmitter is within range of the receiver during this process.
5. Once paired successfully, you will hear the selected doorbell sound, indicating that the transmitter and receiver are now connected.
6. Repeat this process for each transmitter-receiver pair. If you have multiple transmitters for different doors, you can set different ringtones for each transmitter by pairing them individually with the receivers.
It's important to note that it's recommended to pair the transmitters with the receivers before installing the transmitters on the door frame. However, if you have already installed the transmitters, you can use the included small screwdriver to open the transmitter, take off the front cover, and pair it with the receiver again.
For further troubleshooting or assistance, refer to the Coolqiya Q2 Wireless Doorbell User Manual or contact customer support.
Add New Comment