User Manual Q&AAnswer
Aug 24, 2024 - 02:08 AM
To adjust the thickness of the slices, follow these steps:
1. Locate the thickness control feature on the slicer. It is usually a xxxx or dial located on the side or front of the machine.
2. Turn the xxxx or dial clockwise to increase the thickness of the slices or counterclockwise to decrease the thickness.
3. Start with the xxxx or dial set to the thinnest setting and gradually increase the thickness until you achieve the desired slice thickness.
4. The thickness range of the slicer is from ultra-thin slices to approximately 15mm thick. Adjust the control according to your preference.
5. Make sure to monitor the slicing process to ensure the desired thickness and consistency are achieved. If necessary, make further adjustments to the thickness control or slicing technique.
Note: It is recommended to refer to the instruction manual for specific details and illustrations on adjusting the thickness control of the CUSIMAX CMFS-200 Electric Food Slicer Machine.
Add New Comment