User Manual Q&AAnswer
Aug 24, 2024 - 01:26 AM
To install the DECLUTTR J851E Rechargeable Wall Mounted Makeup Mirror, please follow these easy step-by-step instructions:
1. Remove the Mounting Iron Sheet: Begin by removing the mounting iron sheet from the back of the mirror.
2. Mark the Installation Hole Position on the Wall: Use a pencil or marker to mark the positions on the wall where you intend to install the mirror.
3. Drill Holes in the Wall: Using a drill, create holes in the wall at the marked positions. Ensure that the holes are suitable for the screws you will be using.
4. Install 2 Expansion Screws into the Hole: Insert the expansion screws into the holes you drilled in the wall. Make sure they are securely fastened.
5. Apply Base Panel and Install xxxx : Apply the base panel of the mirror to the wall, aligning it with the installed expansion screws. Then, secure the base panel in place by tightening the screws.
6. Install the Wall Lamp and xxxx on the Protective Cap: Finally, install the wall lamp portion of the mirror onto the base panel. Secure it in place by screwing on the protective cap.
Please refer to the user manual for visual illustrations and additional details on the installation process.
Note: It is recommended to seek professional assistance if you are unsure or uncomfortable with the installation process.
Add New Comment