User Manual Q&AAnswer
Aug 24, 2024 - 01:17 AM
Adjusting the brightness and color of the LED lights on the LOVESPEJO SM-JStabletop Makeup Mirror is easy with the touchscreen controls. Here's a step-by-step guide:
1. Ensure that the mirror is turned on and the LED lights are activated.
2. Locate the touchscreen controls on the mirror's frame. These controls are usually located on the bottom or side of the mirror.
3. To adjust the brightness, lightly tap the brightness icon on the touchscreen. Each tap will increase the brightness level. Continue tapping until you reach your desired brightness.
4. To change the light color, press and hold the color icon on the touchscreen. This will activate the color selection mode.
5. While in the color selection mode, lightly tap the color icon to cycle through the available color options. The mirror typically offers three color lights, such as warm, natural, and cool lighting.
6. Release your finger from the color icon when you reach your desired light color.
7. The mirror will remember your last brightness and color settings, so you don't need to readjust them every time you use the mirror.
Note: If the touchscreen controls are not responding, ensure that the mirror is powered on and adequately charged. Clean the touchscreen surface to remove any dirt or residue that may be affecting responsiveness. If the issue continues, try resetting the mirror or contact customer support for further assistance.
For more detailed instructions and illustrations, please refer to the user manual provided with your LOVESPEJO SM-JStabletop Makeup Mirror.
Add New Comment