User Manual Q&AAnswer
Aug 24, 2024 - 12:27 AM
To adjust the brightness of the LED lights on the Deweisn SYNCHKG118603 Dresser Mount Tri-Fold Lighted Vanity Mirror, follow these steps:
1. Locate the touch sensor switch on the mirror. It is usually located on the front or side of the mirror frame.
2. To turn on the LED lights, simply touch the sensor switch once. The lights will turn on at their default brightness level.
3. To adjust the brightness, press and hold the sensor switch. As you hold it, the lights will gradually dim or brighten. Release the switch when you reach your desired brightness level.
4. If you want to turn off the lights, touch the sensor switch again.
Note: The touch sensor switch is sensitive, so a light touch is sufficient to operate it. If you are having trouble adjusting the brightness, make sure your fingers are clean and dry, as moisture or dirt can interfere with the sensor's functionality.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment