User Manual Q&AAnswer
Aug 21, 2024 - 06:38 AM
To adjust the spiral width on the BELLA 14641 Automatic Electric Spiralizer, follow these steps:
1. Before attaching the blade assembly to the holder, check the spiral dial setting.
2. To change the spiral width, remove the blade assembly by turning the blade assembly lock dial clockwise to unlock the blade assembly holder. Slide the blade assembly holder away from the veggie holder.
3. Turn the spiral dial to select any of the four widths: 1, 2, 3, or 4.
4. Make sure the blade assembly is not attached to the unit.
5. Make sure the protective blade cover is locked into position when adjusting the spiral setting, attaching, or removing the blade assembly.
6. Replace the blade assembly with the sliding blade assembly holder. Push down firmly on the top of the blade assembly until it locks into place.
7. The spiralizer is now adjusted to the desired spiral width. You can now prepare your food to be spiralized.
Note: Always make sure the blade assembly is not attached to the unit when adjusting the spiral width. Also, ensure that the protective blade cover is locked into position during the adjustment process.
Add New Comment