User Manual Q&AAnswer
Aug 21, 2024 - 12:26 AM
To replace the bulb in the Simple Designs LT3039 Mosaic Tiled Genie Table Lamp, follow these steps:
1. Ensure the lamp is unplugged from the power source before proceeding.
2. Allow the lamp to cool down if it has been recently used.
3. Locate the socket beneath the lampshade where the bulb is inserted.
4. Gently unscrew and remove the existing bulb from the socket.
5. Insert a new 40W Type B10 E12 Candelabra Base bulb into the socket, making sure it is securely seated.
6. xxxx the bulb clockwise until it is snugly in place.
7. Avoid touching the bulb with bare hands, as oils from the skin can cause damage or reduce the lifespan of the bulb.
8. Once the new bulb is installed, plug the lamp back into a power source.
9. Use the in-line rotary switch on the lamp's cord to turn the lamp on and enjoy the new illumination.
Note: It is important to use the recommended type and wattage of bulb specified by the manufacturer to prevent overheating or damage to the lamp's components.
Add New Comment