User Manual Q&AAnswer
Aug 21, 2024 - 12:22 AM
To connect the Takmly MX200 WiFi Digital Microscope to your mobile device, follow these steps:
1. Turn on the microscope by long-pressing the power/photo button until the blue LED starts flashing.
2. Open the WiFi settings on your mobile device and search for available networks.
3. Look for a WiFi hotspot named "inskam314-xxxx" (xxxx represents a unique identifier).
4. Connect to the "inskam314-xxxx" network (no password is required).
5. Once connected, open the "inskam" app on your mobile device.
6. You should now be able to use the microscope through the app and view the live feed from the microscope's camera.
Please note that the WiFi indicator on the microscope will stop flashing once the WiFi connection is successful. If you encounter any issues, refer to the troubleshooting section in the user manual or contact customer support for further assistance.
Add New Comment