User Manual Q&AAnswer
Aug 20, 2024 - 04:36 AM
To adjust the brightness of the LED lights on the BWLLNI AE-MIRR09-TMM mirror, follow these steps:
1. Make sure the mirror is powered on by pressing the power button.
2. Look for the smart touch sensor switch on the screen of the mirror. It should be located near the edge of the mirror.
3. Gently touch and hold the sensor switch until the LED lights turn on.
4. Once the lights are on, continue touching and holding the sensor switch. The brightness will gradually increase.
5. Release the sensor switch when you reach your desired brightness level. The lights will stay at that brightness setting until you change it again.
6. If you want to decrease the brightness, touch and hold the sensor switch again until the lights start to dim. Release the switch at your desired brightness level.
Note: The mirror has a memory function that remembers the brightness setting it was on before being switched off. So, the next time you turn on the mirror, it will automatically return to the same brightness level.
Please refer to the user manual for additional information and troubleshooting tips regarding the mirror's LED lights.
Add New Comment