User Manual Q&AAnswer
Aug 16, 2024 - 05:49 AM
To install the bulbs in the FOLKSMATE T220042P1X2 bedside table lamp, please follow these steps:
1. Make sure the lamp is unplugged from the power source.
2. Push the nut up to the base of the lamp.
3. Place the bulb base down and tighten it with the nut to secure it in place.
4. Unscrew the fixing ring located on top of the lampshade.
5. Place the lampshade onto the lamp holder.
6. xxxx the fixing ring back down to secure the lampshade in place.
7. Install the LED bulb into the lamp socket. Please note that the bulb is not included with the lamp.
For a visual demonstration, you can refer to the "Installation" section of the user manual provided with the product.
If you have any further questions or need additional assistance, please consult the user manual or reach out to FOLKSMATE's customer service team for support.
Add New Comment