User Manual Q&AAnswer
Aug 16, 2024 - 02:08 AM
To install the binocular viewing head on the OMax M82ES Series Microscope, follow these steps:
1. Locate the head lock thumb xxxx on the top of the microscope body. If it is not pre-installed, find it in the same package as the microscope.
2. Loosen the head lock thumb xxxx .
3. Remove the cap on the circular dovetail of the binocular viewing head.
4. Insert the binocular viewing head into the top of the microscope body, ensuring that the dovetail is completely seated into the socket.
5. Tighten the head lock thumb xxxx to secure the binocular viewing head in place.
Note: Do not release the viewing head from your hand grip until you are sure it is installed securely.
For visual reference, you can refer to Figure 1 in the OMax M82ES Series Binocular Compound Microscope User Manual.
Add New Comment