User Manual Q&AAnswer
Aug 16, 2024 - 12:10 AM
Adjusting the brightness of the LED lights on the Nitin Touch Control Large Cosmetic Mirror is easy. Here's a step-by-step guide:
1. Make sure the mirror is plugged into a power source and turned on.
2. Locate the touch sensor on the mirror's screen. It is usually located on the bottom or side of the mirror.
3. Lightly touch and hold the touch sensor until the LED lights turn on.
4. Once the lights are on, continue touching and holding the touch sensor to activate the brightness adjustment mode.
5. While still touching the sensor, swipe your finger across the sensor in an upward or downward motion to increase or decrease the brightness, respectively.
6. Release your finger from the touch sensor when you have reached your desired brightness level.
7. The LED lights will adjust accordingly to the selected brightness level.
Please note that the touch sensor is sensitive, so a light touch is sufficient to activate the controls. If you have any further questions or encounter any issues, please refer to the user manual or contact Nitin customer support for assistance.
Add New Comment