User Manual Q&AAnswer
Aug 15, 2024 - 06:56 AM
To install the Zadro LEDW410 LED Lighted Wall Mount Mirror, follow these steps:
1. Determine the position where you would like to place the mirror, preferably near a wall stud for better stability.
2. Unscrew the mounting plate from the mirror to locate the mounting holes and mark the hole locations on the wall.
3. Use a 1/8" drill to make 1" deep holes at the marked locations.
4. Install the mounting bracket onto the wall.
5. Place the mirror plate over the mounting bracket and secure it with three screws.
6. Ensure that the mirror is securely attached before using.
For more detailed instructions and illustrations, please refer to the "Installation Instructions" section in the Zadro LEDW410 LED Lighted Wall Mount Mirror Instruction Manual.
Note: It is important to read and follow all safety instructions provided in the manual before installing the mirror.
Add New Comment