User Manual Q&AAnswer
Aug 13, 2024 - 06:37 AM
To adjust the brightness of the bulbs in the COOLJEEN 7055 Large Hollywood Vanity Mirror, please follow these steps:
1. Locate the touch controls on the mirror. These are usually located on the bottom or side of the mirror surface.
2. Tap the power button to turn on the mirror. The LED bulbs should light up.
3. Look for the brightness adjustment buttons. These are usually represented by icons such as "+" and "-".
4. Press the "+" button to increase the brightness or the "-" button to decrease the brightness. Each press should adjust the brightness level incrementally.
5. Continue pressing the buttons until you reach your desired brightness level. The mirror usually offers multiple brightness settings to cater to different lighting preferences.
6. If the mirror has different lighting modes (warm light, daylight, cool light), you may need to cycle through the modes using a separate button or touch control. This allows you to choose the lighting color temperature that suits your needs.
7. Once you have adjusted the brightness and lighting mode, the mirror should remember your settings for future use. You can turn off the mirror by pressing the power button again.
Note: If you are still having trouble adjusting the brightness or if the buttons are not responding, please refer to the user manual for specific instructions or contact the manufacturer's customer support for assistance.
Add New Comment