User Manual Q&AAnswer
Aug 13, 2024 - 06:04 AM
Sure! Here are the step-by-step instructions for assembling the LDTTCUK NST-104 Nightstand with Charging Station:
1. Start by unpacking all the components and lay them out on a clean and flat surface.
2. Take the main frame of the nightstand and position it upright, with the open side facing towards you.
3. Attach the four feet to the bottom of the nightstand frame. Make sure they are securely screwed in to ensure stability.
4. Next, locate the drawer and slide it into the designated slot on the front of the nightstand frame. Ensure that it glides smoothly.
5. Now, take the two side panels and attach them to the main frame, aligning the pre-drilled holes. Secure them in place using the provided screws.
6. Once the side panels are attached, locate the top panel and place it on top of the nightstand frame. Align the holes and secure it with the screws provided.
7. Now, it's time to install the charging station. Locate the charging station panel on the right side of the nightstand. Connect the power cord to the back of the charging station panel.
8. Attach the charging station panel to the nightstand frame, aligning the holes. Secure it in place using the screws provided.
9. Finally, double-check all the screws and connections to ensure everything is securely fastened.
Congratulations! You have successfully assembled your LDTTCUK NST-104 Nightstand with Charging Station. Enjoy using it to conveniently charge your devices and store your belongings.
Add New Comment