User Manual Q&AAnswer
Aug 13, 2024 - 05:44 AM
Sure! Here are the step-by-step instructions for assembling the TUTOTAK TB02-4041 End Table with Charging Station:
1. Start by unpacking all the components from the box, including the end table, assembly guide, installation tool, and charging station.
2. Lay out the parts and identify the different pieces: the tabletop, the two-tier storage shelf, the metal frame, the adjustable feet, and the charging station.
3. Attach the metal frame to the tabletop by aligning the pre-drilled holes and using the provided screws and installation tool. Make sure to tighten the screws securely.
4. Once the tabletop and metal frame are securely attached, flip the assembly over so that the metal frame is facing upwards.
5. Attach the two-tier storage shelf to the metal frame by aligning the pre-drilled holes and using the provided screws and installation tool. Again, make sure to tighten the screws securely.
6. Once the storage shelf is attached, flip the assembly back over so that the tabletop is facing upwards.
7. Attach the four adjustable feet to the bottom of the metal frame. These feet will help balance the table on uneven surfaces and prevent floor scratches. Adjust the feet to ensure stability.
8. Finally, connect the charging station to the designated area on the tabletop. Make sure to align the charging station properly and secure it in place.
9. Once everything is assembled, double-check all the connections and tighten any loose screws if necessary.
10. Your TUTOTAK TB02-4041 End Table with Charging Station is now ready to use! You can start organizing your items on the two-tier storage shelf and utilize the charging station for convenient device charging.
If you encounter any difficulties during the assembly process, refer to the provided assembly guide for visual instructions. Additionally, if you have any further questions or need assistance, you can contact TUTOTAK's customer service for prompt support.
Add New Comment