User Manual Q&AAnswer
Aug 13, 2024 - 05:11 AM
To assemble the HOOBRO BF041BZP201 End Table with Charging Station, please follow the assembly instructions provided in the instruction manual. Here is a step-by-step guide:
1. Start by identifying all the components included in the package. Make sure you have all the necessary parts.
2. Begin by attaching the metal frame to the tabletop. Align the xxxx holes on the frame with the corresponding holes on the tabletop.
3. Insert the screws provided into the holes and use the included Allen wrench or screwdriver to tighten them securely. Repeat this step for all corners of the table.
4. Once the frame is securely attached to the tabletop, locate the drawer and its corresponding tracks. Insert the tracks into the designated slots on the sides of the drawer.
5. Carefully slide the drawer into the opening on the front of the table until it is fully inserted and aligned.
6. Next, attach the lower shelf to the metal frame. Align the xxxx holes on the shelf with the corresponding holes on the frame.
7. Insert the screws provided into the holes and tighten them securely using the Allen wrench or screwdriver.
8. Finally, adjust the feet of the table to ensure stability on uneven surfaces. Rotate the feet clockwise or counterclockwise to raise or lower them as needed.
9. Once the assembly is complete, double-check all screws and connections to ensure they are tight and secure.
10. Your HOOBRO BF041BZP201 End Table with Charging Station is now ready to be used.
Please refer to the instruction manual for any additional details or specific instructions related to the assembly process.
Add New Comment