User Manual Q&AAnswer
Aug 13, 2024 - 04:58 AM
Sure! Here are the step-by-step instructions to assemble the HOOBRO BK341BZ01 End Table with Charging Station:
1. Start by unpacking all the components and lay them out on a flat surface.
2. Take the metal frame pieces and connect them according to the provided assembly diagram. Use the supplied Allen key to tighten the screws securely.
3. Once the metal frame is assembled, place it upright on the floor.
4. Take the particleboard top surface and align it with the metal frame. Secure it in place using the provided screws and the Allen key.
5. Next, attach the lower open shelves to the metal frame using the screws and Allen key.
6. Now, locate the clamshell top drawer and slide it into the designated slot on the top surface. Ensure that it glides smoothly.
7. Connect the power cord to the charging station located on the side of the end table.
8. Finally, check all the connections and tighten any loose screws if necessary.
That's it! Your HOOBRO BK341BZ01 End Table with Charging Station should now be fully assembled and ready to use. If you need further assistance, please refer to the instruction manual provided with the product.
Add New Comment