User Manual Q&AAnswer
Aug 13, 2024 - 04:56 AM
Sure! Here are the step-by-step instructions for assembling the LIDYUK End Table with Charging Station:
1. Start by unpacking all the components and lay them out on a clean and flat surface.
2. Begin by attaching the metal frame to the tabletop. Align the xxxx holes on the frame with the corresponding holes on the tabletop.
3. Insert the provided screws into the holes and use the included Allen wrench or screwdriver to tighten them securely.
4. Once the frame is securely attached to the tabletop, you can proceed to attach the shelves. Place the shelves on the designated slots on the metal frame.
5. Align the holes on the shelves with the holes on the frame and insert the screws. Use the Allen wrench or screwdriver to tighten them.
6. Next, locate the hidden drawer and slide it into the designated slot underneath the tabletop. Ensure that it slides smoothly and is aligned properly.
7. Now, you can connect the power cord to the hidden power outlet. The power cord is 6.5 feet long, so you should have enough length to reach a nearby power source.
8. Finally, adjust the feet pads on the bottom of the table to ensure stability and prevent scratches on the floor. You can twist them clockwise or counterclockwise to raise or lower the table's height.
That's it! Your LIDYUK End Table with Charging Station is now assembled and ready to use. If you have any further questions or need assistance, please refer to the user manual provided with the product.
Add New Comment