User Manual Q&AAnswer
Aug 13, 2024 - 04:51 AM
Assembly instructions for the Rolanstar ED003 End Table with Charging Station are included in the package. Here are the step-by-step instructions to help you assemble the table:
1. Lay out all the components and hardware included in the package to ensure everything is present.
2. Start by attaching the legs to the tabletop. Align the holes on the legs with the corresponding holes on the tabletop.
3. Insert the provided screws into the holes and use a screwdriver or Allen wrench (depending on the type of screws provided) to tighten them securely.
4. Repeat this process for all four legs, ensuring they are evenly attached and tightened.
5. Once the legs are securely attached, you can move on to assembling the drawers. Insert the drawer slides into the designated slots on the inside of the table.
6. Attach the drawer fronts to the drawer slides, ensuring they are aligned properly.
7. Secure the drawer fronts to the slides using the provided screws or other hardware.
8. Repeat this process for the second drawer.
9. After the drawers are assembled, you can insert them into the designated slots on the table.
10. Make sure the drawers slide smoothly and are aligned properly.
11. Finally, connect the power cord to the charging station located on the side or back of the table.
12. Plug the other end of the power cord into a nearby electrical outlet.
Please refer to the user manual for any specific instructions or illustrations that may assist you during the assembly process. If you encounter any difficulties or have further questions, don't hesitate to consult the user manual or contact Rolanstar customer support for assistance.
Add New Comment