User Manual Q&AAnswers
Aug 12, 2024 - 11:42 PM
To adjust the brightness of the LED lights on the KOOKIN USB Dual Supply Bathroom Beauty Cosmetic Mirror, you need to use the touch sensor located on the front of the mirror. Here's how to do it:
1. Make sure the mirror is turned on by pressing the switch button located on the back of the mirror near the battery compartment.
2. To adjust the brightness, long press the front sensor until the desired brightness level is achieved. The lights will gradually dim or brighten as you hold down the sensor.
3. Release the sensor to set the brightness level. The mirror will remember the last brightness setting for future use.
Note: Tapping the front sensor will only turn the LED lights on or off. To adjust the brightness, you need to perform a long press on the sensor.
If you're still having trouble adjusting the brightness, refer to the instruction manual for further troubleshooting tips or contact customer support for personalized assistance.
Aug 12, 2024 - 11:42 PM
To adjust the brightness of the LED lights on the KOOKIN USB Dual Supply Bathroom Beauty Cosmetic Mirror, you need to use the touch sensor on the front of the mirror. Here's how:
1. Tap the front sensor of the mirror to turn the LED lights on or off.
2. To adjust the brightness level, long press the front sensor until the desired brightness is achieved.
3. Release the sensor to set the brightness level.
Please note that the touch sensor needs to be pressed and held for a few seconds to activate the brightness adjustment feature. Once the desired brightness is reached, release the sensor to set the brightness level.
If you're still having trouble adjusting the brightness, please refer to the instruction manual for further troubleshooting tips or contact customer support for personalized assistance.
Add New Comment