User Manual Q&AAnswer
Aug 12, 2024 - 05:08 AM
To assemble the Leebein YMG-818 Electric Spin Scrubber, follow these steps:
1. Unpack the Scrubber: Remove the Leebein YMG-818 Electric Spin Scrubber from its packaging.
2. Inspect Parts for Damage: Carefully inspect all parts for any signs of damage before proceeding with the assembly.
3. Attach Expandable Arms: Attach the expandable arms to the body of the scrubber by screwing them in firmly. Ensure the arms are tightly secured to prevent wobbling during use.
4. Adjust Arm Length: Locate the button on the lower part of the scrubber where the expandable arm locks into place. To unlock the expandable arm, push the button and turn it counterclockwise. Extend the arm to the desired length. Turn the button clockwise to lock the arm back into place.
5. Insert Brush Head: Choose the appropriate brush head for the cleaning task. Insert the selected brush head into the scrubber's holder at the end of the shaft.
6. Replace Brush Head: To replace a brush head, pull out the old brush head gently. Slide the new brush head into place securely.
7. Adjust the speed setting (if applicable) to suit the cleaning task.
8. Apply the cleaning solution to the chosen brush attachment.
9. Gently press the brush against the surface to be cleaned.
10. Move the scrubber along the surface, allowing the bristles to penetrate deeply between tiles, grout lines, etc.
11. Rinse off the brush attachment periodically to prevent buildup of dirt and debris.
12. After completing the cleaning task, disconnect the brush attachment from the scrubber and store it separately.
13. Wipe down the scrubber with a damp cloth to remove any remaining dirt and debris.
14. Store the scrubber in a safe, dry location.
For more detailed instructions and illustrations, please refer to the user manual provided with the Leebein YMG-818 Electric Spin Scrubber.
Add New Comment