User Manual Q&AAnswer
Aug 12, 2024 - 04:37 AM
Assembling the Keimi KS-2640 Electric Spin Scrubber is a simple process. Here are the step-by-step instructions:
1. Before assembling any part, make sure the spin scrubber is turned off.
2. Take the main handle and align it with the top of the scrubber body. Insert the main handle into the slot on the scrubber body until it clicks into place.
3. Next, take the retractable extension handle and align it with the bottom of the main handle. Insert the extension handle into the slot on the main handle until it clicks into place.
4. Once the handles are securely attached, you can choose the appropriate brush head for your cleaning needs. The Keimi KS-2640 Electric Spin Scrubber comes with four replaceable brush heads: dome brush, large flat brush, small flat brush, and corner brush.
5. To attach a brush head, simply align the brush head with the connection point on the scrubber body and twist it clockwise until it locks into place.
6. Repeat this step for any additional brush heads you want to use.
7. Now that the scrubber is assembled, you can power it on by holding the Power button for 1.5 seconds. The scrubber will start in low-speed mode by default.
8. If you want to switch to high-speed mode for deep cleaning, press the Power button again. Press the Power button a third time to turn off the scrubber.
Note: It's important to assemble the device properly before use to avoid any malfunctions during operation. Make sure all parts are securely attached before using the scrubber.
For more detailed instructions and safety information, please refer to the Keimi KS-2640 Electric Spin Scrubber User Manual provided with your product.
Add New Comment