User Manual Q&AAnswer
Aug 12, 2024 - 04:21 AM
To install the bulb in the CopperBull CopBul_Multi Moroccan Mosaic Table Lamp, please follow these steps: 1. Start by removing the lampshade from the lamp. Gently lift it off the lamp to expose the bulb socket. 2. Identify the suitable bulb type for your region. In the US, the lamp uses E12 Candelabra bulbs, while in the UK/EU regions, it uses E14 bulbs. Make sure you have the correct bulb type. 3. Take the new bulb and align the base with the socket. Insert the bulb into the socket and gently twist it clockwise until it is securely in place. Be careful not to overtighten. 4. Once the bulb is properly installed, replace the lampshade by carefully placing it back onto the lamp. Ensure that it sits evenly and securely on the lamp. 5. You can now turn on the lamp using the rocker switch located on the lamp's body. Toggle the switch to the "On" position, and the lamp should illuminate. Note: Before installing or replacing the bulb, make sure the lamp is unplugged from the power source for safety reasons. Also, remember to use bulbs that fall within the recommended wattage range to prevent overheating and potential harm. For further details and safety precautions, please refer to the "PRODUCT USAGE" section in the CopperBull CopBul_Multi Moroccan Mosaic Table Lamp Operating Manual.
Add New Comment