User Manual Q&AAnswer
May 02, 2025 - 06:44 PM
🔧 Resetting the Hiseeu NVR (Network Video Recorder)
-
Locate the Reset Button:
-
The reset button is typically a small pinhole labeled “RESET” on the back or bottom of the NVR.
-
Use a paperclip or similar tool to press and hold this button.
-
-
Perform the Reset:
-
With the NVR powered on, press and hold the reset button for approximately 10–15 seconds.
-
Release the button once the NVR restarts.
-
This action will restore the NVR to its factory settings, including resetting the username and password.
-
-
Default Login Credentials:
-
After the reset, the default username is often admin, and the password field is left blank.
-
If this doesn’t work, consult your user manual or the manufacturer’s website for model-specific default credentials.
-
📷 Resetting Individual Hiseeu Cameras
If you’re using standalone Hiseeu cameras (not connected to an NVR):
-
Locate the Camera’s Reset Button:
-
The reset button is usually a small pinhole on the camera body.
-
Refer to your camera’s manual for the exact location.
-
-
Perform the Reset:
-
Ensure the camera is powered on.
-
Press and hold the reset button for about 10 seconds.
-
Release the button once the camera’s indicator light flashes or changes, indicating a reset.
-
-
Reconfigure the Camera:
-
After resetting, you’ll need to set up the camera again using the Hiseeu app or software, following the initial setup instructions.
-
🛠️ Additional Tips
-
Firmware Updates: After resetting, check for firmware updates to ensure your system has the latest features and security patches.
-
Secure Your System: Change default login credentials to secure your system against unauthorized access.
-
Backup Settings: If possible, back up your settings before performing a reset to simplify the reconfiguration process.
Add New Comment