User Manual Q&AAnswer
Aug 10, 2024 - 12:43 AM
To assemble the Licperron Liperra02 Vintage Table Lamp, please follow these steps:
1. Carefully unbox the lamp, making sure not to damage any components.
2. Remove any protective covers from the lamp base and socket.
3. Insert the desired E26/E27 Edison light bulb into the socket, ensuring proper alignment. Please note that the bulb is not included in the box.
4. Connect the plug-in cord securely to the socket at the bottom of the lamp base.
5. Turn on the wall outlet where you plan to place the lamp.
6. Locate the on/off switch on the plug-in cord and turn the lamp on.
7. Adjust the position of the lamp base until it rests firmly and evenly on a flat surface.
8. Make sure that the cord is not stretched too tightly or twisted, and keep it at a safe distance from heat sources.
9. Position the lamp according to your preferred angle and orientation.
10. Test the lamp's functionality, checking for stability and proper lighting.
11. Confirm that no parts are loose or damaged before proceeding further.
12. If needed, clean the lamp base gently with a soft cloth dampened with mild soap and water, avoiding moisture exposure to electrical components.
13. Keep the lamp away from flammable substances and liquids.
14. Remember to disconnect the lamp from the power source whenever it is not in use or during transportation.
If you encounter any difficulties during the assembly process or have further questions, please refer to the user manual provided with the lamp or contact the manufacturer for assistance.
Add New Comment