User Manual Q&AAnswer
Aug 09, 2024 - 10:32 PM
Here is a step-by-step guide on how to assemble the Signature Design by Ashley L243164 Jacek Modern Table Lamp:
1. Unpacking: Carefully take the lamp and all of the pieces out of the packaging, ensuring that every part is present.
2. Inspection: Before assembly, inspect each component for any damage or flaws to ensure optimum performance.
3. Base Assembly: Start by placing the lamp base on a level and stable surface.
4. Shade Attachment: Carefully secure the cloth shade to the base by tightening any included finials or screws. This will help keep the shade stable.
5. Installing a Lightbulb: Insert an E26 base lightbulb into the socket. It is recommended to use a bulb that does not exceed the maximum wattage allowed by the lamp.
6. Power Connection: Make sure the lamp's cord is not stretched too far across walkways while plugging it into a power outlet to avoid trip hazards.
7. Test the 3-Way Switch: Check the operation of the 3-way switch to ensure that the lighting levels are cycling through correctly.
8. Positioning: Place the lamp on a firm surface, such as a bedside table or living room end table, away from areas where it could be easily knocked over.
9. Precautionary Steps: To protect the lamp from power spikes, consider using a surge protector.
10. Final Adjustments: Make sure the shade is positioned evenly for the best possible dispersal of light.
Please refer to the user manual provided with the lamp for any additional instructions or safety precautions.
Add New Comment