User Manual Q&AAnswer
Aug 09, 2024 - 02:32 AM
Adjusting the brightness of the ELINKUME TB-MRT001-WM Touch Control Table Lamp is easy and can be done using the touch control feature. Here are the step-by-step instructions:
1. Make sure the lamp is plugged into a power source and turned on.
2. Locate the touch control area on the lamp base. This is usually a small, circular area.
3. To turn on the lamp, touch the touch control area once. The lamp will turn on at the default brightness setting.
4. To adjust the brightness, touch the touch control area repeatedly. Each touch will cycle through the different brightness levels: high, medium, and low.
5. Keep touching the touch control area until you reach your desired brightness level.
6. To turn off the lamp, touch and hold the touch control area for a few seconds until the lamp turns off.
Note: The lamp has a memory function that saves the previous light setting used. So, the next time you turn on the lamp, it will remember the brightness level you last set.
For more detailed instructions and information, please refer to the user manual that came with your ELINKUME TB-MRT001-WM Touch Control Table Lamp.
Add New Comment