Answer
Aug 09, 2024 - 02:23 AM
To assemble the Educational Insights El-5351F Nancy B's MoonScope, follow these step-by-step instructions:
1. Gently pull the tripod legs apart as far as they will go. Press down on the center of the tripod supports until the tripod locks open.
2. Place the optical tube over the mount and lower it so that the plastic "tongue" on the mount slips into the bracket underneath the tube. Line up the holes on the prongs with the holes in the tongue.
3. Push the xxxx of the altitude lock xxxx through the holes in the optical tube and the mount. Turn it clockwise to xxxx it in place.
4. Tighten the altitude lock xxxx enough so that you can move the optical tube up or down and it will stay pointed at the angle you want.
5. Find the azimuth lock xxxx and tighten it, if necessary, by turning it clockwise. The xxxx , when fully tightened, will lock your telescope's horizontal movement.
6. Remove the protective plastic cap from the diagonal mirror. Find the 20mm eyepiece and take off the protective cap. Optional: Insert the moon filter into the back of the eyepiece. Slide the eyepiece into the diagonal mirror.
7. To turn on the light, slide the switch on the bottom of the tripod.
8. Don't forget to remove the lens cap before observing.
Please refer to the instruction guide for visual diagrams and additional information on using and caring for your MoonScope.
Add New Comment