User Manual Q&AAnswer
Aug 09, 2024 - 01:56 AM
To change the brightness settings on the PARTPHONER led1101163PA Touch Control Table Lamp, follow these steps:
1. Ensure that the lamp is connected to a power source and turned on.
2. Locate the touch-sensitive area on the lamp's base. This area is designed to respond to touch commands for adjusting the brightness.
3. Tap the touch-sensitive area once to turn on the lamp and activate the lowest brightness setting.
4. To increase the brightness, tap the touch-sensitive area again. Each tap will cycle through the three available brightness settings: Low, Medium, and High.
5. Keep tapping until you reach the desired brightness level. The lamp will remember the last brightness setting used when turned off and will resume at that level when turned on again.
Note: The touch-sensitive controls on the lamp's base may require a firm touch for optimal responsiveness. If you are having trouble adjusting the brightness, ensure that your touch is registering on the touch-sensitive area.
For more detailed instructions or troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment