User Manual Q&AAnswer
Aug 09, 2024 - 01:13 AM
If the CADUKE LR-ATL26 Industrial Desk Lamp is not turning on, there are a few troubleshooting steps you can take:
1. Ensure proper connection: Make sure that the lamp is securely plugged into a working power outlet. Check the power cord for any visible damage or fraying. If the cord is damaged, do not use the lamp and contact the manufacturer for assistance.
2. Test a different outlet: Try using a different power outlet to rule out any issues with the current outlet. Sometimes, power supply issues can prevent the lamp from turning on.
3. Check the switch: Ensure that the lamp switch is in the "off" position before connecting it to power. Use the provided switch on the cord to turn on the lamp. If the switch is not functioning properly, try rotating it in both directions to see if it engages.
4. Inspect the bulb: Check if the bulb is properly seated in its socket. If the bulb appears loose, turn off the lamp and allow it to cool down before tightening it. If the bulb is damaged or burnt out, replace it with a new one that is compatible with the lamp's specifications.
5. Contact customer support: If none of the above steps resolve the issue, reach out to the manufacturer's customer support for further assistance. They will be able to provide specific troubleshooting guidance or arrange for a replacement if necessary.
Note: Always ensure that the lamp is turned off and unplugged before performing any troubleshooting steps to avoid electrical hazards.
Add New Comment