User Manual Q&AAnswer
Aug 09, 2024 - 01:06 AM
To change the color mode on the Paladone PP2722PM PacMan Ghost Table Lamp, follow these steps:
1. Make sure the lamp is plugged into a USB power source and turned on.
2. Locate the touch control button on the lamp. It is usually located on the base or near the power cord.
3. Tap the touch control button once to cycle through the different color modes.
4. The lamp has two main color modes: Party Mode and Color Phasing.
- Party Mode: This mode adds ambiance to any event with flashing lights that follow the beat of the music. To activate Party Mode, tap the touch control button until the lamp enters this mode. Adjust the sound sensitivity dial to control how the lights react to the music.
- Color Phasing Mode: This mode offers a nostalgic touch with its ability to cycle among nine distinct colors that bring back memories of the classic Pac-Man games' 8-bit aesthetic. To activate Color Phasing Mode, tap the touch control button until the lamp enters this mode.
5. Once you have selected the desired color mode, the lamp will continue to cycle through the colors or flash to the beat of the music, depending on the mode chosen.
6. To change the colors in Color Phasing Mode, simply tap the touch control button again to cycle through the available colors.
7. Experiment with different color modes and colors until you find your favorite setting.
Note: The exact steps may vary slightly depending on the specific model and version of the PacMan Ghost Table Lamp. For more detailed instructions, refer to the user manual provided with the product.
Add New Comment