User Manual Q&AAnswer
Aug 08, 2024 - 04:18 AM
To pair your Cox Homelife Smart Door Lock with the Homelife system, follow these steps:
1. On your Touchscreen Control Panel, press the Settings app.
2. Enter your 4-digit master keypad code.
3. From the Settings menu, select Home Devices > Door Locks > Add Door Lock.
4. The Locating Door Lock Devices screen will appear. Press Next to begin the pairing process.
5. Now, at your door lock, press the A button on the inside panel 4 times to put it into pairing mode.
6. Go back to the Touchscreen. Once the door lock is found by the Touchscreen, it will begin pairing. (Note: Do not press Done during the pairing process.)
7. When the "Door Lock" icon appears, pairing is complete. Press Done. Then press Next to configure the device.
If you encounter any issues during the pairing process, you can try resetting the lock by pressing the B button 9 times. This should allow you to restart the pairing process by pressing the A button 4 times.
Once the pairing is complete, you can configure the door lock by following the instructions in the manual. You can also program user codes and complete the installation by attaching the back cover of the door lock.
For further assistance or technical support, you can contact Cox Homelife at 1-877-404-2568.
Add New Comment