User Manual Q&AAnswer
Aug 08, 2024 - 01:07 AM
To connect your Logitech POP Smart Button to Apple HomeKit, follow these steps:
1. Set up your Apple HomeKit and any other HomeKit accessories you may have before adding the POP button/switch. If you need help with this step, refer to Apple support.
2. Open the Home app and tap the Add Accessory button (or + if available).
3. Wait for your accessory to appear, then tap it. If asked to add an Accessory to the Network, tap Allow.
4. Use the camera on your iOS device to scan the eight-digit HomeKit code on the accessory or enter the code manually.
5. Add information about your accessory, such as its name or the room it's located in. Siri will identify your accessory by the name you give it and its location.
6. Tap Next, then tap Done to finish the setup. Your POP bridge will have a name similar to logi:xx:xx.
7. Some accessories, like Philips Hue lighting and Honeywell thermostats, may require additional setup with the manufacturer's app.
8. Note that you cannot use one POP button/switch simultaneously with the Apple Home app and Logitech POP app. You must remove the button/switch from one app before adding it to the other. When adding or replacing a POP button/switch, you may need to factory reset it (not the bridge) to pair it with your Apple HomeKit setup.
For up-to-date instructions on adding an accessory to Home, please refer to Apple's support documentation.
Add New Comment