How do I set up my Cox Contour 2 TV Host DVR Box? (Cox Contour 2 TV Host DVR Box User Manual)

Answer

manuals.plus

Aug 08, 2024 - 12:40 AM

To set up your , follow these steps:

1. Plug in the Contour box:
- Connect the coax cable to an active cable outlet and the "Cable from Wall" port on the Contour box.
- Connect the HDMI cord to your TV and the Contour box.
- Connect the power cord to an electrical outlet and the Contour box.

2. Activate the Contour box:
- Turn on your TV and use your original TV remote to press the source or input button.
- Select the correct HDMI connection.
- Follow the on-screen instructions for activation. Wait a few minutes for the activation to finish.

3. Set up your new Voice remote:
- Follow the on-screen instructions to set up your new Voice remote.
- When you see "All Set", press OK.

If you encounter any issues during setup, here are some troubleshooting tips from the manual:

- If your Contour box is not working, try rebooting it by unplugging the power cord from the wall, waiting for 10 seconds, and then plugging it back in. Allow a few minutes for the reset to complete. Ensure all connections are tight and properly plugged in.

- If you see a "No Input" message on your TV, the input/source might not be set correctly. Use your TV remote to press the "input" or "source" button until you select the HDMI connection that matches the port your HDMI cable is plugged into on your TV.

For more detailed instructions and additional help, you can refer to the Cox Contour 2 TV Host DVR Box User Manual or contact Cox customer support through their website, chat, or phone.