User Manual Q&AAnswer
Aug 08, 2024 - 12:38 AM
To connect the Cox TM3402 Voice 3.1 Phone Modem, follow these steps:
1. Connect the coax cable to an active cable outlet and the Modem.
2. Connect the power cord to an electrical outlet and the Modem.
3. Wait a few minutes for the Modem to boot up. The Online light will be solid when it is connected to the network.
4. If you have Cox Voice, connect the telephone cord that came with your phone to the "Tel 1" port on the back of the Modem.
5. If you have Cox Internet, connect the Ethernet cable to the Modem and the other end to your computer or Wi-Fi router.
TIP: It is recommended to plug the coax cable into a centrally located cable outlet, preferably the same outlet where the old device was connected.
For further assistance, you can refer to the Cox TM3402 Voice 3.1 Phone Modem User Manual or contact Cox support through the provided channels.
Add New Comment