User Manual Q&AAnswer
Aug 08, 2024 - 12:36 AM
To connect the Logitech Z606 speakers to your device, follow these steps:
1. Connect each satellite speaker to its corresponding plug on the back panel of the subwoofer. The front left and right satellites use the red/black cable, the center satellite uses the blue/black cable, and the rear left and right satellites use the gray/black cable.
2. Plug the power cord into an AC power outlet.
3. Turn on the speakers by using the switch located on the back panel of the subwoofer.
4. You can connect to the speakers wirelessly via Bluetooth or physically using a 3.5mm audio jack or RCA cable. For Bluetooth connection, press the Bluetooth button on the subwoofer or remote control to enter Bluetooth mode and pair your device. For wired connection, select the appropriate source (AUX or RCA) on the subwoofer or remote control and connect your device using the corresponding cable.
Once connected, you should be able to enjoy audio from your device through the Logitech Z606 speakers. For more detailed instructions and troubleshooting, please refer to the user documentation provided with the product.
Add New Comment