User Manual Q&AAnswer
Aug 07, 2024 - 06:38 AM
If your Panoramic Wifi Gateway is not working, there are a few troubleshooting steps you can try:
1. Reboot the Gateway: Unplug the power cord from the wall, wait for about 10 seconds, and then plug it back in. Give it a few minutes to reset and see if it starts working.
2. Check the connections: Ensure that all the connections are tight and properly plugged in. Make sure the coax cable is securely connected to both the Gateway and an active cable outlet.
3. Verify network connection: Open the wifi settings on your smartphone, tablet, or computer and try connecting to the network using the network name (SSID) and password provided on the label at the bottom of the Gateway. If you're having trouble connecting, wait a few minutes and try again.
4. Check for active coax outlet: Ensure that you are using an active coax outlet. It should be centrally located and not surrounded by metal objects. If the current outlet is not working, try connecting to a different one.
If these steps do not resolve the issue, it is recommended to reach out to Cox customer support for further assistance. You can contact them through the Cox app, website, live chat, or phone support provided in the instructions.
Add New Comment