Answer
Aug 07, 2024 - 06:19 AM
To connect your provider's network, follow these steps:
1. Take a coaxial cable and connect one end to a cable outlet or a splitter connected to a cable outlet.
2. Connect the other end of the coaxial cable to the cable port of your TC4400 modem.
Question: How do I power on my TC4400 cable modem?
Answer: To power on your TC4400 cable modem, follow these steps:
1. Plug the connector of the electric power supply adapter into the power inlet port of your TC4400 modem.
2. Plug the adapter into a nearby power outlet.
3. If your TC4400 modem has a power button, press the power button to turn it on. If there is no power button, your TC4400 modem is already powered on.
4. Wait for a few minutes until the Online LED on the modem turns solid green. If the DS and US LEDs are blinking simultaneously, it means your TC4400 modem is updating its software. Wait for the update to complete without powering off the modem or unplugging any cables.
Question: How do I connect my device to the TC4400 cable modem using a wired (Ethernet) connection?
Answer: To connect your device to the TC4400 cable modem using a wired (Ethernet) connection, follow these steps:
1. Take an Ethernet cable. If one has been included in your package, it is recommended to use the included Ethernet cable.
2. Connect one end of the Ethernet cable to one of the yellow Ethernet ports on your TC4400 modem.
3. Connect the other end of the Ethernet cable to your device, such as a computer or a router.
4. Your Ethernet device is now connected to the internet. If needed, you can connect a second Ethernet device to your TC4400 modem using the same procedure.
5. Please note that the connected Ethernet devices are directly connected to the internet. If you want to set up a local network, you need to place a router between your TC4400 modem and your Ethernet devices.
For more detailed instructions and troubleshooting information, please refer to the technicolor TC4400 Cable Modem User Manual provided in the link.
Add New Comment