User Manual Q&AAnswer
Jul 31, 2024 - 03:52 AM
Sure! Here is a step-by-step guide on how to install the MAXvolador BCT-3E26 Vintage Wall Sconce Light:
1. Start by securing the mounting plate to the wall's wiring box using the supplied screws. Make sure it is firmly attached.
2. Rotate the two tubes to firmly attach them to the light body.
3. Use screws to fasten the tubes and base after attaching the gold ground wire and silver inner-toothed washers.
4. Attach the fixture's cables to the matching wires in the junction box.
5. Use the included screws to fasten the base to the mounting plate.
6. Put the E26 base (not included) bulbs into the light holders.
7. Select the preferred orientation of the fixture (downward or upward) and make any necessary adjustments.
8. Use the push-button control to switch the fixture on and off and check its functionality.
9. If desired, you can use a compatible dimmer switch (not provided) to adjust the brightness level.
Please refer to the instruction manual for more detailed information and illustrations on the installation process.
Add New Comment