User Manual Q&AAnswer
Jul 31, 2024 - 01:50 AM
To adjust the motion sensor settings on the Euri Lighting EFL-130W-MD Flickering Flame Porch Light, follow these steps:
1. Locate the motion sensor on the porch light. It is usually located near the bottom of the fixture.
2. Depending on the specific model, there may be different methods for adjusting the settings. Refer to the instruction manual for your specific model for detailed instructions.
3. In general, motion sensor settings can be adjusted using dials, switches, or buttons located on the sensor itself. These controls may be accessible by removing a cover or panel.
4. Use the provided tools or a small screwdriver to adjust the sensitivity and duration settings as desired. The sensitivity setting determines how easily the motion sensor is triggered, while the duration setting determines how long the light stays on after motion is detected.
5. Test the motion sensor by walking in front of the porch light to ensure that the settings are adjusted to your liking. Make any necessary adjustments until you are satisfied with the sensor's performance.
Note: It is important to refer to the instruction manual for your specific model of the Euri Lighting EFL-130W-MD Flickering Flame Porch Light, as the exact method for adjusting the motion sensor settings may vary.
Add New Comment