User Manual Q&AAnswer
Jul 30, 2024 - 03:05 AM
To change the color and speed of the projection on the HONGID 012-1652 Unicorn Night Light Projector, follow these steps:
1. Turn on the night light projector by connecting it to a power source using the USB cable or inserting 4 AAA batteries (not included) into the compartment.
2. Once the night light projector is turned on, you can choose the color you want by turning the projection around. The available colors are warm white, blue, red, and green. Simply rotate the projection until you reach your desired color.
3. To adjust the speed of the spinning projection, there should be a control xxxx or button on the night light projector. Rotate the xxxx or press the button to increase or decrease the speed of the spinning motion.
4. Experiment with different color combinations and projection speeds to create the desired ambiance in the room.
5. Remember to avoid using both the USB cable and batteries at the same time for best results.
If you need further assistance, please refer to the user manual or contact HONGID customer support for more specific instructions.
Add New Comment