How do I change the colors and styles of the Hoofun L140214-M9FX 3D Illusion Stitch Night Light? (Hoofun L140214-M9FX 3D Illusion Night Light User Manual)

Answer

manuals.plus

Jul 30, 2024 - 02:33 AM

To change the colors and styles of the Hoofun L140214-M9FX 3D Illusion Stitch Night Light, you have two options: using the remote control or the touch button on the base. Here's a step-by-step guide:

Using the Remote Control:
1. Make sure the night light is connected to a power source either through the USB cord or with 3 AA batteries (not included).
2. Point the remote control towards the night light's receiver.
3. Press the "ON" button on the remote control to turn on the night light.
4. Use the color buttons on the remote control to select your desired color. There are 16 colors to choose from.
5. Press the "FLASH" button to activate the flashing mode. There are 4 flash patterns available.
6. Press the "STROBE" button to activate the strobe mode.
7. Press the "FADE" button to activate the fade mode.
8. Press the "SMOOTH" button to activate the smooth mode.
9. Adjust the brightness of the light by pressing the up and down arrow buttons on the remote control.

Using the Touch Button on the Base:
1. Make sure the night light is connected to a power source either through the USB cord or with 3 AA batteries (not included).
2. Touch the button on the base once to turn on the night light.
3. Each touch will cycle through the available colors (7 colors) and modes (4 modes).
4. Touch the button again to turn off the night light.

Note: The remote control and touch button on the base have the same functions, but the remote control provides more convenience in controlling the night light from a distance.

If you encounter any difficulties or have further questions, please refer to the user manual that came with the product for more detailed instructions.